M130

Introducing M130

M130 is a multi-purpose gateway and controller. The M130 OpenECU™ is designed for applications that require 4 CAN/CAN-FD channels and a small controller.

Intended applications include CAN-to-CAN message forwarding, LIN-to-CAN message translation, and sensor-to-CAN data broadcasting. The M130 can whitelist specific IDs to shield one CAN bus from unwanted CAN messages on a different bus, for data protection purposes. The M130 can also be used to modify the CAN messages from one bus before transmitting them on the other bus. Using the two LIN channels and the six analog inputs, the M130 can also broadcast smart sensor data to any of its four CAN busses.

M130 CAN Gateway ECU

Capabilities

• Advanced 32-Bit NXP Microprocessor
  • SPC5746B
  • 80 MHz
  • Up to 3MB code space
  • Up to 256kB RAM space
  • Up to 256kB Calibration space
• 4 high speed CAN 2.0B/ CAN-FD  channels
• Wake on CAN (CANA)
• 2 LIN channels
• Ignition Input
• Total of 6 Analog/Digital inputs
• 2 RTD capable analog inputs
• Software configurable delayed power off
• 2 Analog voltage output channels
• 1 5V 200mA sensor power supply output

Some of the Possible Applications

• CAN Gateway Module
• CAN to LIN Gateway
• CAN I/O Expansion Box
• Smart Relay Driver
• Embedded System Control and Supervisor
• Alternative Fuel System Controller

Hardware Specifications¹

¹For full details please refer to the full M130 Technical Specification

²LIN slave mode on 1 channel can be offered as a population change option